Slick 60's

I have installed a T18 4 on the floor in my 66 slick, which had a 3 one the tree originally.
Does anyone know how, or have pictures of how the clutch is connected to the frame and then the trans/bell housing?
My original trans had a place to support the clutch, the T18 does not.
Thanks

I'm not sure if this will answer you question but take a look at this post

http://slick60s.com/viewtopic.php?f=1&t=32319

There are a couple pictures in there showing clutch linkages comparing 61-64 vs 65-66.