Slick 60's

got the shackles and hangers in today.
also put the not rusty bed on too.



check out this hitch and bumper. good bye.



my trusty sidekick hard at work. lol. donnie is a good guy and had all the good tools. air and fire, what more could one want?





and they say beauty is in the eye of the beer holder, but in this case the beer holder is a beauty (donnie's 29 rumble seat coupe).

It was a nice cool day for some work !

Nice! Looks Real Good Chris....................

What hangers/shackles did you use? I'm not aware of any available for the 3/4 ton or did you just use the 1/2 ton version and enlarge the holes?

Did you do something to lower the front too?

.....niiiiiiiiice.

cool
can i have that bumper it looks a little nicer than mine

The lowering kit is from djm. I used the 67-72 kit. The springs and related hardware are the same dimensions as the f100.

Hmmm. I thought LMC catalogs listed different part numbers for 1/2 ton vs 3/4 ton bolts and bushings so i assumed the bolts were bigger in the 3/4 tons.

It looks good!

did you lower the front too?

I did not. It sits level now. Spring width is the same and bolt diameter is the same. I didn't compare the bushing outer diameters. The outer bushing diameters and spring eyes could be different.

looking good Chris