Page 5 of 5
Re: '62 F250 Monster Hauler build
Posted: November 17, 2015, 1:48 pm
by unibody madness
Check the ground to the chassis and body panels, new paint can make it an issue.
Re: '62 F250 Monster Hauler build
Posted: December 5, 2015, 2:09 am
by Lancer
Update on the Monster Hauler. I finally got to hear the motor through the new exhaust. It was short lived, seems my Craigslist carb is having some issues. This is after I replaced the points by the way which were toast. Fix one issue, find another. Not sure whats up with the carb. Swapping it out on Sunday with a rebuilt Holley and hoping that remedies the situation. I can then set the timing and get it dialed in and REALLY hear it well. And get some video. Two steps forward, one step back. Pretty normal for my car projects.
Re: '62 F250 Monster Hauler build
Posted: May 5, 2016, 5:16 pm
by Lancer
Well, due to having four project cars and running two side business its been a little while since I posted any updates. Let me get some updates going. Here is a quick vid of the engine running. Choke is not hooked up so you'll see that flapping about but you'll get the idea.
https://www.youtube.com/watch?v=dfkRLVk ... e=youtu.be
Re: '62 F250 Monster Hauler build
Posted: May 11, 2016, 10:29 am
by Lancer
Re: '62 F250 Monster Hauler build
Posted: May 26, 2016, 5:13 pm
by Lancer
Re: '62 F250 Monster Hauler build
Posted: September 13, 2016, 10:58 pm
by Lancer
Re: '62 F250 Monster Hauler build
Posted: September 14, 2016, 6:42 am
by shipwrecked
looking good.
Re: '62 F250 Monster Hauler build
Posted: September 14, 2016, 9:43 am
by foodstick
It does NOT get any more red than that color .. WOW!
Re: '62 F250 Monster Hauler build
Posted: September 14, 2016, 6:03 pm
by Lancer
foodstick wrote:It does NOT get any more red than that color .. WOW!
Its called performance red. Its a GM color. The pic shows it a little oranger than it is but yes, very intense red.
Re: '62 F250 Monster Hauler build
Posted: April 10, 2017, 10:51 pm
by Lancer
Does anyone have a wiper switch? The actual knob with switch that mounts into the dash? Mine was missing when I got the truck. I've looked and they don't seem to replicate that part from what i can find. I need the bezel too. Any advice or direction would be great. Thanks.
Here are some updated photos. Doors went back on and I got the front window installed over the weekend. Still have a bunch of paint work to do and am now assembling the dash. Feels good to be bolting parts back on. I am dropping off my seat on Friday at the upholsterer.
