Slick 60's

Posted: **May 17, 2011, 10:41 pm**

az: Where did you get the mirrors in the first pics of this thread?

Posted: **May 17, 2011, 11:01 pm**

the little one over the door? its just a peep mirror. speedway sells them. that one actually came off my '29 model a

Posted: **May 17, 2011, 11:04 pm**

bill w.: nope. cant run it now. i dont think there will be enough clearance with the hood. ill use it on something else, sell it, or trade it. plus i dont want to hide those pretty carbs!

Posted: **May 21, 2011, 10:00 pm**

so garbz and i started to run brake lines today. got almost all of them run. and actually i just stood over garbz to keep the sun off him and to keep him cool and to hand him tools.

from under the drivers feet up towards the master cylinder

the new duel master with new lines

front left brake hose and brake line

front right brake hose. no line yet

you can almost see the new wilwood proportioning valve

the new stainless clips for the brake lines and the fuel lines. brake lines running towards the rear.

rear brake line about to connect to the brass tee on the rear end

from the duel master and heading down to the wilwood proportioning valve

connecting two lines

running towards the rear along the frame

the new wilwood proportioning valve

up to the master cylinder

before anyone comments about the fancy new wilwood parts or that i have a proportioning valve. stop right there. i know its fancy and i know this is a traditional build. but im also smart and build safe rides. my girlfriend will be riding with me alot and shes hot and ild like to keep her that way. so safety first sometimes.

Posted: **May 21, 2011, 10:05 pm**

got in the double d steering rod and the elbows. we started to mock them up today. we proubly wont put them in untill later in the build so the rod wont tarnish. not sure if we are going to paint it or not.

Posted: **May 21, 2011, 10:08 pm**

when was or have you ever seen a bolt on gear rubber floor mat? this is the first one that i have ever seen. it came out of the parts truck we just got in. too bad it was too far gone to save. i cut the logo section out and ill do something creative with it.

Posted: **May 21, 2011, 10:10 pm**

azratrod wrote:my girlfriend ... shes [is] hot...

Proof pic required.

I like the new parts. I will probably do the same.

Posted: **May 21, 2011, 10:31 pm**

My 64 had one of those too. Was in fairly decent shape til I tried to remove it and found out how brittle it was.
I think I saved a piece with the logo -
I have no idea where it is though, lol.

Posted: **May 21, 2011, 10:40 pm**

now would i lie? garbzs has met her. here is the proof

chelsea

chelsea and my boy chewy

if any of you have a Tilted Kilt pub near you she will be in there 2012 swimsuit calander and will be traveling the country doing franchise grand openings and calander signings. we are hoping she gets the cover of the calander and a month. not just a month. shes a top 3 finialist for the cover. so make sure to go in and see her when the new calander comes out or when a new location opens up near you. i know this is self promotion but im proud and lucky.

yeah yeah! that is me in a kilt. and us together at a promotion. i used to bartend and bounce in that damn thing. she loves it when i wear it. says im "sexy" in it

Posted: **May 21, 2011, 10:49 pm**

I remember you posting that first pic once before.
Very attractive young lady.

Posted: **May 22, 2011, 12:07 am**

WARNING...MAN LEGS!

You are a lucky man.

Posted: **May 22, 2011, 2:51 am**

Wow that was close!, I nearly asked who that big Goober was with her!
Happy now Dan!

I am!

Posted: **May 30, 2011, 7:48 pm**

Any progress man? I'm missing my weekly Azratrod fix....

Posted: **May 31, 2011, 4:34 pm**

didnt get much progress done over the holiday weekend. gabz went out of town and i was busy selling parts. we have some big things coming and everyone will be blown away.

Posted: **June 16, 2011, 6:26 pm**

picked up some powder coated parts today. take a look at the pretty parts. dont mind the dust on the parts. they look like they have flake on them. the intake is actually for sale now. im selling it due to the fact that im going to be running the offy intake instead.

seat brackets in gloss black

hood hinge in gloss black

hold downs in gloss grey

2 barrel intake in gloss grey. its for sale too!

neck in gloss grey

fire wall clamp for the ignition in gloss black. the fire wall will be gloss white. it will stand out nicely

Posted: **June 17, 2011, 8:17 pm**

Eric, i would be intrested in the intake... the 3 bolt intake and stromberg style carb i have is not going to work on my 63.

i dont think i can afford to run that honkin 4 bbl carb on it.

Posted: **June 17, 2011, 8:38 pm**

if you want it bill its all yours. ive had some intrest in it but no one wants to pay for shipping

Posted: **June 17, 2011, 9:14 pm**

maybe we can find something to swap for, do you still need a steering column?

Posted: **June 17, 2011, 9:27 pm**

nope. i have my steering parts coming from pete. i do need a rear roll pan off a unibody

Posted: **June 17, 2011, 10:52 pm**

done!

Slick 60's

azratrods '64

mirror in build thread

caddy air cleaner on top of tri power

we got brake lines!

double d steering rod and joints

bolt on gear rubber floor mat

chelsea

memorial day weekend progress

picked up powder coating today 6.16.2011

intake

trade for intake