Power window switches that use stock window handle

Johnny Canuck · Post by **Johnny Canuck** » September 12, 2008, 11:09 am

Power window switches that use stock window handle

anybody know who has these? I know I have seen 'em

Johnny Canuck · Post by **Johnny Canuck** » September 12, 2008, 11:28 am

Never mind.. found them
http://www.thehoffmangroup.com/autoloc/ ... emid=EWS-2

Now I got to find some saturn motors

Motocentro · Post by **Motocentro** » September 12, 2008, 1:05 pm

Very cool, Johnny - Thanks!

jecsd1 · Post by **jecsd1** » September 12, 2008, 5:03 pm

Has someone done an article on this saturn motor conversion yet?? hint hint, Uh hmmmm

Johnny Canuck · Post by **Johnny Canuck** » September 12, 2008, 5:10 pm

http://www.purpleflyingmonkey.com/1964- ... indow.html

Alan Mclennan · Post by **Alan Mclennan** » September 12, 2008, 8:01 pm

I haven't used that power window set up, but will next time thanks to Chris!. I have those power window switches they work great, except the spline isn't the best fit, and people grab hold of them and try and gorilla them around. So preflight instruction is required

Alan,

jecsd1 · Post by **jecsd1** » September 12, 2008, 11:36 pm

I stand corrected. Great how to!

Wollfe · Post by **Wollfe** » September 13, 2008, 6:49 am

You might want to reconsider those switches
I know for a fact that with the saturn window
conversion there is not enough room between
the window motor and the door for a switch.
At least on my 63 there is not.

So unless you plan on relocating the window
handle you might want to mock the conversion
up before buying

blackagatha · Post by **blackagatha** » September 14, 2008, 1:25 am

seems like they are intended for conversions with a different regulator setup... like the lift rail systems....

shawns fords · Post by **shawns fords** » September 14, 2008, 9:37 am

Johnny Canuck wrote:Never mind.. found them
http://www.thehoffmangroup.com/autoloc/ ... emid=EWS-2

Now I got to find some saturn motors

Man they still have not budged on the price

sometimes they have them on display at goodguys rod n custom shows and they still cost the same but no shipping. I also Remember Greg found them for about 80 bucks somewhere else. I need the set for mine but it will have to wait for now.. and maybe next year... and so on... and so on...

Alan Mclennan · Post by **Alan Mclennan** » September 14, 2008, 7:06 pm

shawns fords wrote:
Johnny Canuck wrote:Never mind.. found them
http://www.thehoffmangroup.com/autoloc/ ... emid=EWS-2

Now I got to find some saturn motors
Man they still have not budged on the price sometimes they have them on display at goodguys rod n custom shows and they still cost the same but no shipping. I also Remember Greg found them for about 80 bucks somewhere else. I need the set for mine but it will have to wait for now.. and maybe next year... and so on... and so on...

Shawn you got that right!, they are not cheap, and when you think about it they are only 2 micro switches one up and one down with a heavy aluminium case to stop over reaching the switches and mounting the handle, surely one of us could come up with something cheap

cu-pi doll for the best idea!

Alan,