trans
-
unibody madness
- Posts: 2147
- Joined: December 4, 2008, 4:33 pm
- Location: Paradise,CALIFORNIA 95969
Re: trans
Will the bell work for the t5 conversion? If it fit a y block I would want it, sadly I dont think it will
Turk build thread at:
http://slick60s.com/viewtopic.php?f=32&t=18944
It does not matter what you think, it only matters what you do about it!
http://slick60s.com/viewtopic.php?f=32&t=18944
It does not matter what you think, it only matters what you do about it!
Re: trans
If nothing else, I would pull the shift linkage. Personally, I would pull everything off that is usable, but then, I am a packrat.
Rich
Rich
1961 F350
1964 Galaxie convertable
1964 flairside, style side, and longbed
1965 Ranger, and shortbed
1966 long bed, and shortbed
A few parts trucks also
1991 Capri
2011 F250
2004 Lexus
1964 Galaxie convertable
1964 flairside, style side, and longbed
1965 Ranger, and shortbed
1966 long bed, and shortbed
A few parts trucks also
1991 Capri
2011 F250
2004 Lexus
-
charliemccraney
- Posts: 1743
- Joined: July 9, 2008, 10:02 pm
- Location: Lawrenceville, GA
Re: trans
Me, too. While things may not be particularly hard to find, they sure aren't getting easier to find. I would save anything that is good and if I didn't have room to hold onto it, at least make an effort to give the stuff to people who either can use it or can store it before I scrap it.64 f100 wrote:Personally, I would pull everything off that is usable...
Rich
Lawrenceville, Ga
1961 F100 Unibody
318 Y-block (292 +.070 bore, +.170 stroke), FMS T5-Z w/Mustang 10.5" diaphragm clutch.
1961 F100 Unibody
318 Y-block (292 +.070 bore, +.170 stroke), FMS T5-Z w/Mustang 10.5" diaphragm clutch.
Re: trans
I have a 3 speed from behind a 66 352 that I have been advertising on Craiglist for $45. Over a year, and I am getting tired of tripping over it. It may be going to china soon....
Big Bad Dad
If it needs sayin', Say it!
If it needs sayin', Say it!