"What's My Truck Worth?"

DV65CustomCab · Post by **DV65CustomCab** » July 7, 2007, 7:51 am

I got tired of answering this question on that other site so wrote up a page for my web site. Remember, it's personal opinion, so don't be offended if I, uh, offend you.

http://www.mongrelmotorsports.homestead ... value.html

GLindley · Post by **GLindley** » July 7, 2007, 12:11 pm

Nice article, thanks for taking the time to put your opinions in linkable form!!

dotcentral · Post by **dotcentral** » July 7, 2007, 9:22 pm

Well written, thanks.

66fordtrucknut · Post by **66fordtrucknut** » July 8, 2007, 7:06 am

Very nicely written Dwight!
Charlie

Johnny Canuck · Post by **Johnny Canuck** » July 15, 2007, 10:56 am

This should be made a compulsory "Must Read" for every newbie. We should get Matt or Kid to post it as a sticky "Newbies Read this first" on the 2 main forums.

In fact there should be 3, how to add disc brakes and power steering to a straight axle and how to do the disc brake swap on a twin I (your other excellent article) should be up there too.

Very well done and consistent article Dwight, but did you eat a big bowl of Chevy Flakes before you wrote it? Lots of Stepsides and Fleetsides for an article about Fords..

(You knew you couldn't get away with at least ONE dig..)

Phil · Post by **Phil** » July 15, 2007, 11:09 am

Ive reread it a few times.
I think the "problem areas" section is invaluable

DV65CustomCab · Post by **DV65CustomCab** » July 15, 2007, 10:03 pm

Johnny Canuck wrote: Very well done and consistent article Dwight, but did you eat a big bowl of Chevy Flakes before you wrote it? Lots of Stepsides and Fleetsides for an article about Fords..

You know, I honestly can't remember what the hell these truck beds are called most days. Since most of the people are already calling them by the wrong names, I really have only done it to make it more understandable to those less Canadian than some of us here.

Johnny Canuck · Post by **Johnny Canuck** » July 16, 2007, 8:08 am

Hey

you watch yerself or I will sic the terminology master, FBp on you, and you won't be able to call a Unibody a unibody anymore. And he's from Florida!
Can't get much further away from Canada than there!!

Now if you'll excuse me, I have to finish my breakfast of Ford ovals!

So good! ...and good for you!!

DV65CustomCab · Post by **DV65CustomCab** » July 16, 2007, 2:34 pm

No such thing as a unibody that has body on frame construction JC.

Everyone else is wrong, and I'm right, but I still call them Uni's because I'm not afraid to speak down to the peasants unlike some Rulers Of The Universe.

Johnny Canuck · Post by **Johnny Canuck** » July 16, 2007, 6:56 pm

those of us at the bottom of the dung heap appreciate your magnanimousness, Dwight.