63 unibody

noley99 · Post by **noley99** » January 8, 2012, 8:41 pm

Your kicking butt there Chris... Keep it up!!!

dragginwagon · Post by **dragginwagon** » January 8, 2012, 8:50 pm

thanx!!!!

dragginwagon · Post by **dragginwagon** » January 14, 2012, 7:22 pm

fixed the transmission hump today, had 2 rusted out spots and some outtie dents...i think the ujoint broke and the driveshaft beat up the hump a lil, hammer and dolly took care of it

modded the column mount and raised it about .75 in... should be where i want it

look at this bullshit!!! found this where the stereo goes....id never paid attention and scrapped out 2 trucks, now i notice all the bondo.... had to go and cut the center out of a junkyard truck.there was .5 in of bondo!!!!!
i'll have the patch in tomm

it snowed!!!!

me covered in bondo dust and my dog fittingly named......bondo lol

MadMaxetc · Post by **MadMaxetc** » January 14, 2012, 9:54 pm

Holy cow dude. They really packed that bondo in there. Must have been thick!

dragginwagon · Post by **dragginwagon** » January 14, 2012, 10:25 pm

yeah it was at least .5 inch thick!

HiBoy63 · Post by **HiBoy63** » January 15, 2012, 1:31 pm

You could drive an F600 through that hole. What did they have mounted in there one of the old reel to reel tape decks.

Alan Mclennan · Post by **Alan Mclennan** » January 15, 2012, 3:46 pm

HiBoy63 wrote:You could drive an F600 through that hole. What did they have mounted in there one of the old reel to reel tape decks.

Thats funny!, I was thinking of a 3 in 1 when I saw the hole!, the mind boggles to think what they had in there!

dragginwagon · Post by **dragginwagon** » January 16, 2012, 2:00 pm

yeah it was pretty crazy... got it patched up but no pics yet
75% of the wirewall holes are filled in, should be done this week

made a pattern for my gauges, tell me what you think

2 four inch gauges ( speedo and a quad gauge) and 3 two inch air gauges...

dragginwagon · Post by **dragginwagon** » January 21, 2012, 6:44 pm

wow....look at all the feedback, lol

more work...
i have a set of 5 1/4 diamond audio components been layin around for a while, decided i would put them to use...
these will be welded on once im done with the cab.

dash is fixed

firewall is shaved and need to finish cleaning so i can spray it

thenephilm · Post by **thenephilm** » January 21, 2012, 6:57 pm

Looking real good sir. I like the kick panels, those should work out rather nicely.

napass2004 · Post by **napass2004** » January 21, 2012, 10:18 pm

So I'm guessing your using the dual needle gauges for the bags and the third one for tank pressure I just got done doin a sanoma the same way and it works out awesome you've made great progress on this project can't wait to see it done

[ Post made via iPhone ]

UNIFAN · Post by **UNIFAN** » January 24, 2012, 9:29 pm

I bet they will sound like crap down in the floor like that!

I kid. Been a minute since I checked on you, progress is looking great! Keep it up!

dragginwagon · Post by **dragginwagon** » January 25, 2012, 7:50 am

thanx brian, its gettin there...wish it was a bit faster!
i should have the cab mounts installed and back wall patched this weekend. i need to order some bedliner stuff for the firewall and door steps also. once thats done i'll bring the frame in to assemble all the suspension, brakes, and drivetrain.

mrgoob · Post by **mrgoob** » January 25, 2012, 8:26 am

Nice work. Thanks for taking the time to share the pics.

slickmainer · Post by **slickmainer** » January 25, 2012, 8:52 pm

i like those speaker boxes, way better than drilling the door ones

dragginwagon · Post by **dragginwagon** » February 5, 2012, 6:01 pm

waitin on the bedliner but i got the firewall, bed spots, and door steps primed

thenephilm · Post by **thenephilm** » February 6, 2012, 9:42 pm

Lookin real good.

slickmainer · Post by **slickmainer** » February 7, 2012, 4:06 pm

I need a unibody cart like that. How did you get the whole thing lifted?..it's probably on page 1.

noley99 · Post by **noley99** » February 8, 2012, 9:10 pm

Looking really nice Chris! You are keeping me inspired.

stoney1964 · Post by **stoney1964** » February 10, 2012, 10:02 am

Wow! I dont know what to say. TALENT comes to mind and that's about it. Lot to say for someone who can dream of what he wants and then do it. This was my first time to see this truck. Awesome! If I had your help for about an hour, I could be driving mine! Sweet baby girl too! She is probably walking around by now! I have 3 kids and they are 19,14,11 now. They have all grown up wanting to cruise around in my truck but its never been finished. That's ok, the money went to feed them instead. Ha!

63 unibody

Re: 63 unibody

Re: 63 unibody

Re: 63 unibody

Re: 63 unibody

Re: 63 unibody

Re: 63 unibody

Re: 63 unibody

Re: 63 unibody

Re: 63 unibody

Re: 63 unibody

Re: 63 unibody

Re: 63 unibody

Re: 63 unibody

Re: 63 unibody

Re: 63 unibody

Re: 63 unibody

Re: 63 unibody

Re: 63 unibody

Re: 63 unibody

Re: 63 unibody