slick60 hats

Post by **foodstick** » November 1, 2011, 9:29 am

I think technically those were a golf style hat, and anymore it isn't wise to use the Ford Logo, I suppose you might find someone that would ad the club logo to a Ford hat..but even that might be tough to get done...

Gritsngumbo · Post by **Gritsngumbo** » November 1, 2011, 9:34 am

Realizing it would be more expensive, but could we buy the Ford logo caps and have the "Slick 60's" info embroidered around the logo?

Gritsngumbo · Post by **Gritsngumbo** » November 1, 2011, 9:41 am

This is way, way OT and I certainly don't make it a habit to look at guys butts, but what is this? A meeting of the "assless society"?

64crew4x4 · Post by **64crew4x4** » November 1, 2011, 12:02 pm

I am in for 3....

But I must add Flex fit hats are great for Smaller Folks....
They Give me a Headache....I usually have to run a Snap style adjustable hat out on the Last 2-3 pins....Call me a Fat head, but it is what it is....
I atribute it to all the Uselessology I have crammed between the ears....
And I know I am not the only one....
Do they make a big guy flex fit....?

Johnny Canuck · Post by **Johnny Canuck** » November 1, 2011, 12:26 pm

removed, I am sorry

Alan Mclennan · Post by **Alan Mclennan** » November 2, 2011, 2:05 am

Johnny Canuck wrote:Then can we use the logo that looks like a hood ornament? the one the texans had made into window stickers?

I agree!

Post by **Kid** » November 3, 2011, 5:45 pm

If you guys would like something different than what Gerry had done for us before feel free to take the project on. If you want the Ford Logo or something else that that is Ford specific go ahead as long as you will accept the risk if Ford sees them or are willing to pay them for the rights to use something of theirs ( better have a BIG checkbook).
I don't think most know how much work and hassle it is to do a run of hats and shirts. Everyone wants one and when you get a count and talk to the supplier and tell them you want 50 hats or shirts so you get a price and when you put the word out to actually start taking orders you will only get about 25 percent of the people step up and order. Then you have a few choices, talk to supplier and get another price on a smaller order witch will be more money or pony up the cash to fill the order out of your own pocket and hope you can sell them. If you get a smaller order you then have to go back and raise the price to the ones who ordered or again pony up the cash from your own pocket.
I think the last shirt run I did by the time all this happened I shelled out about 4 bucks per shirt from my own pocket with the higher cost from the smaller order than what I had asked for and shipping.
So if anyone wants to take on a order of hats feel free to do so.......................Kid

Necco-2 · Post by **Necco-2** » November 3, 2011, 7:56 pm

I'm in for one Necco-2

LM14 · Post by **LM14** » November 3, 2011, 9:28 pm

Alan Mclennan wrote:Found one!!

I would take a couple of those
SPark

64crew4x4 · Post by **64crew4x4** » November 4, 2011, 9:06 am

I am in Charge of Doing Hats For My local Bow Shoot Club...

It is a chore....

And now there are SO MANY CHOICES......in hats...

The cool part for me is my Local Hat shop can order single hats in of different flavors....

I have a question about the logo for the Slick Hats....

Someone here has an Avitar or Maybe I saw it in pics...?

Of A rat rodd-ish or Ratfink-ish Slick....? is that logo available...?

I think that with Slick 60's Above or below would Look great as a Hat or Shirt....

Can one of you Phote shop guys whip that up as a test look...?

Or the Hood logo Gear and Lightning bolt With Slick 60's...?

I can tell you from my end...It cost 90.00 here(Eugene Oregon ) to digitize anything to Embroider onto a hat....It is a one time set up fee....After that hats run around 5.00 to 12.00 each....(depends highly on the type of hat ) so if you split 90.00 over 50 guys, it softens the cost pretty well....

Alan Mclennan · Post by **Alan Mclennan** » November 4, 2011, 4:22 pm

64crew4X4

You know what you just did don`t you!, I`ll take 2!

F7BIGJOB · Post by **F7BIGJOB** » November 4, 2011, 4:56 pm

64crew4x4 wrote:I am in Charge of Doing Hats

I think that with Slick 60's Above or below would Look great as a Hat or Shirt....

Or the Hood logo Gear and Lightning bolt With Slick 60's...?....

Alan, this is what I read

Alan Mclennan · Post by **Alan Mclennan** » November 4, 2011, 5:10 pm

me too!

Gritsngumbo · Post by **Gritsngumbo** » November 4, 2011, 5:27 pm

That's the way I read it also.

BTW 64crew4X4: I'll pitch in $10 toward getting the design digitized.

DukeRoche · Post by **DukeRoche** » November 4, 2011, 10:52 pm

Sounds like we got a taker!

Necco-2 · Post by **Necco-2** » November 5, 2011, 7:57 am

Like I said I'm in for TWO. Just tell me how much and where to send the check. GO BUCKS[b

DukeRoche · Post by **DukeRoche** » November 5, 2011, 8:16 am

Another fellow Buckeye fan Necco! We're starting to take over. I'll take two hats. Also just need price and where to send check.

65ford1 · Post by **65ford1** » November 5, 2011, 11:26 am

Put me down for two also,let me know where to send payment. Thanks, Gene

64crew4x4 · Post by **64crew4x4** » November 6, 2011, 10:09 am

You guys are funny......

I don't have a problem trying to make it happen, but I need GREAT ORIGINALS of the logo we are going to use....

I don't want to step on any toes either...??

I will try to figure out the Ratfink-ish logo I saw tonite....

If someone has it e-mail me....
subaruguy72@yahoo.com

I have Very limited Computer time.....EARLY morning and LATE NITE

Johnny Canuck · Post by **Johnny Canuck** » November 6, 2011, 12:33 pm

removed, I am sorry