Taillight Panel and Post

Motocentro · Post by **Motocentro** » May 2, 2011, 11:45 am

Does anyone here know if anyone repops Taillight panel and/or posts? I got attacked by a wild cedar tree at a wedding this weekend and I'm going to need to include the passenger side tail light panel in my upcoming body work extravaganza.

On a related note - does anyone make any replacement bed panels at all for 64 and up Shortbed Stylesides? I'm beginning to think that a few hours welding some in might be the preferable approach.

BTW - My ride is a '65 SWB Styleside if you have any bed parts you would like to part with, let me know (not "i hear there's one in this pasture out by Kitchifoonie")

Post by **Casey 65** » May 2, 2011, 12:13 pm

WWW.jamesduff.com has tail light planels for a Bronco that look like the ones on our trucks. they are $65 new. I'm not sure if the two are interchangeable...

Motocentro · Post by **Motocentro** » May 2, 2011, 12:43 pm

Casey 65 wrote:WWW.jamesduff.com has tail light planels for a Bronco that look like the ones on our trucks. they are $65 new. I'm not sure if the two are interchangeable...

Definitely something to look into. I sent them an email and will post what I find. I think there are a couple of classic Broncos in my neighborhood ... maybe I should go and knock on some doors

Motocentro · Post by **Motocentro** » May 2, 2011, 1:10 pm

Just heard back from James Duff who says they will not fit

If anyone else knows of any leads, I'm open to suggestions. Otherwise I'll just continue the hunt ...

Jim

ICEMAN6166 · Post by **ICEMAN6166** » May 2, 2011, 1:24 pm

i will go look at the parts beds i have and see if the corners are still good. they are longbeds so no sides but the corners are the same.

Motocentro · Post by **Motocentro** » May 2, 2011, 1:32 pm

ICEMAN6166 wrote:i will go look at the parts beds i have and see if the corners are still good. they are longbeds so no sides but the corners are the same.

Thanks, Ice. Let me know what you find.

Brian Taylor · Post by **Brian Taylor** » May 5, 2011, 7:50 pm

Moto I have a passenger bed side I can cut. Sent you a PM