1. I would like to get a ghost uni shirt 2x.
2. What kind if jackets and how much.

Thanks!!!

If I get the monos there are two the regular and the reverse eyed do you have to notch the frame with either one of these?

Well after a few hours with the air sander I was able to get a little primer on. It's an industrial epoxy primer. http://i605.photobucket.com/albums/tt138/Medic579/1250873681.jpg http://i605.photobucket.com/albums/tt138/Medic579/1250873630.jpg Then on the way from my house to the shop my father in l...

How do you guyslower a slick I don't want it slammed but it sits like a farm truck. I know the no limit reverse eye monos are out there but I only payed 1000 for the whole running truck. So in he spirit of a true ratrod whatsthe cheap way out be honest I understand sometimes there is no cheap way. C...

It is suprisingly sturdy even with the holesthe metal is very thick. I'm not worried. I can't just abandon it to many old vehicles are being crushed.

Here are the pics after sandblasting and phosfo(phosphoric acid)it eats away rust and changes the chemical structure of rust back to iron. Extra work but worth it In the long run. Has to cure for 24 hours then you sand it down then prime. It works well in any areas you can't get sand to like cracks ...

you can find rusty trucks in the south to. i just recently bought mine it had been in florida for 35 years but al that salt from its early life is apparent now the reason i went ahead with purchase is my father in law owns a commercial sand blasting buisness. if you need rust repair he says to find ...

Well today was the day i started sand blasting. I started at the back and worked my way forward to the cab boy was this thing rusty. The original bed rusted out so there are lines on both sides where it rusted all the way through the back fenders. Also where the wheel wells are you can see through t...

Which shifter fork or whatever you call it is reverse, 1st. Which is 2nd, 3rd. I'm talking about the ones under the hood at the end of the steering column. Thanks

Well got the wood out of the bed. There are no cross bars under the wood. Apparently when the original bed rusted out the cross bars went with it. If anyone has pics of a uni bed with no bed in it but the cross bars are visible please post it or let me know. I'm thinking of fabricating my own becaus...

It looks like I have a 9 inch in it. I'm going to leave that. I'm just going to get the rust taken care of and get a solid driver out of it. With the rat rod look.

Tomorrow I will start tearing out the old wood bed someone put in when the bed rusted out. Then I can start blasting everything from cab back and prime. Then the real work begins, body repair. Lucky for meAmy father n law owns a large sand blasting buisness and he's a 66 galaxie guy (owns 5). So I h...

It really only smokes on hard acceleration. It does not skip it cranks very easily barely turn the key and it fires riht up idles as long as you will let it it just smokes some. I'm sure there is some wear on the engine it's old but if I can curb the smoking that would be great.

I'm in Tallahassee.

Plans include sand blast a piece here and there prime body work paint flat black red steelies baby moons. My father in law owns a sandblasting buisness I get free sand primer paint sheet metal angle iron etc etc so I'm gonna do it myself keep the 223 and 3 speed for now because I can drive it while ...

It runs really good except smoking a little cranks very quickly idles good gun yo drive I'm very happy

[/url]

here is my new old slick 62 uni 223 3 SPD man 1000 dollars tax tag title from a junk yard not a salvage title. I'm new so thanks in advance for any help. Hope the pictures come out right.

http://emob605.photobucket.com/albums/t ... 910672.jpg[/url]