Bum deal, keep me posted.

I would check the connection at the fuel sender, then make sure the sender has a good ground.

I would love to get the small hood scoop and hood emblems/badges. They would go great on my project

That would be awesome.

Sounds like you need a new wiper motor.

This would be a good time to upgrade to a delay unit.

That is some very good looking work.

The roof of my parts truck is that same red color with a part number in yellow.

Thanks for the replies. My drip rails are good. As it tuns out I can't use much of the parts truck I bought, oh well.

I am still not sure how I want to tackle this.

I had the piece that went into the fender. I had it bent up at a local sheet metal shop. I took careful measurments and used a level in two directions to make sure it was square. I hung the level off the top of the inner fender into the engine compartment. From the level I measured down how far I wa...

I am finnaly back to work on the crew cab. I had some engine problems and got so fed up with the whole thing that I had to take a break. When I installed the new fuel pickup I put it too close to the bottom of the tank. When I did the conversion I never cleaned the tank I just siphoned out all the g...

Well I am back to work on the crew cab. The engine had some problems and I got fed up and had to take a break. The engine is now back running so it is on to other things. I wire wheeled and painted the inside of the roof. What I found was this. http://img443.imageshack.us/img443/1118/1190173.jpg Upl...

I am running dual group 31 batteries. The trays are mounted under the bed on the inside of the frame rail. They are the factory under floor battery tray.

I have two about 5 inches back on the top of the fender. There is nothing left of them but a rubber covered screw. I can get a pic with measurements if you like.

I'm in.

Glad to see you are back at it.

It is looking good.

Well the other day I was working on the crew cab and opened the wing window. Well the window came off in my hand. The lower post had rotted away.

What will I need to put a new wing window in?

My Dad saw 2 of these in Turquoise & White with a clear center and grabbed them at a garage sale for me - just need 7 more now, lol. Doesn't look like anybody stocks them that colour combination though - there is a place with an Ebay store that will make them in any combination you want - $10 e...

I paid 4 grand for mine. It was in about the same shape. The floors and cab mounts were good. The cab corners and lower cowl drain area are rotten. It already had an updated drive train and axles.

I plan on using a Bronco XLT dome light for mine. One for the front and one for the back.

I have a stock Ford from 65. It is very well built. The only problem I have is the rust in the usual spots and the roof has no supports.

I have the supports to go in now, I just have to do it. The roof will oil can when going over rough roads.