If you get it put back together wear can you send it to get refinished

JC,so is John.What about him?

Anybody using an alum. driveshaft? I just got a trac loc diff from a newer car that has the flange type d/s mount for an alum.d/s.I also have the original cruis-o-matic transmission

US,
65.I just thought I'd replace the original while I have the bed off.It's not cracked yet and still usable,just a bit hard.
I dont need it NOW but will pretty soon.
Do you have both?Let me if you find it and how much

I dont think it matters?????There is a plug on the left side under the floorboard that is a 3 prong connector that goes to the rear bumper then splits off to 2 way connectors to the taillights and license plate.So I guess I would be looking for stock

Anybody know where to get the 3&2 wire harness's that go to the back of the truck for the lights?

I didnt thinkthat #1 would be to easy to do in most,all,junkyard.
Thanks US.

Can a 9 inch positrac carrier be ID'ed by the tag or any other way without pulling the whole diff apart.

I dont race M/C.I ride.My son used to race for a couple years.He does'nt do it anymore.We race go carts now

OK.Thanks.Igot that part down with the shims and bearing.I thought there shold be a clearance in there but couldnt remember how much.I think I saw .002 at one time for the f100. Anyway 1 side took 3 and it went good.Started with 3 one the other side and hand 2 much play.Went with 1 more and it was a...

I'm replacing kingpins and bushings right now.There is 8 shims that come with the kit.What is the clearance betqween the spindle and I beam,or is it 2 on top and 2 on the bottom?

I think I'll try shortening mine.Dont see why that would'nt work.
Anybody know a formula for figuring the size tank to how many gallons it will hold?

I am going to make my own fuel tank for relocation.Will the factory sending unit work for this or do I need another type like mustang or??? any ideas

Are you speaking from past experience on this?
I lowered mine 3in in the back.So will that make the Bll unusable?
What I really should have asked is what people have used for a tank if they have a short bed DUH HUH

I need to start lookig for a fuel tank to move mine between the frame.All the posts I've seen about moving the tank to the rear, none specify any difference between a short bed and long bed.I have a short bed and was needing to know if there is a difference in space between the s/b & l/b from th...

I had another thought on this subject.Is there going to be a difference in this mod between a short and long box? I have a short and was wondering if the swap will work the same for both

I don't see a lot of difference in the two cols ('71 v '65
the non P/S shafts are longer but look the same

I have a 75 f250 in my 65.If you use the original column it has to be shortened.Not hard to do.

I put mine in 4 years ago and dont remember having any problems other than getting it up high enuf.I dont think I had to take the starter out either

If it was me knowing what I know now I would get my money back from djm.I havent had nothing but trouble from djm since I put there beems on my truck